No More Metal
- No More Metal is a superior metal sequestriant designed to remove dissolved metals from pools, spas and hot tubs.
- This product is a must for all stain treatments, can be used to prevent calcium scale build up and is ideal for the initial filling of new pools.
- Should be used in conjunction with Multi Stain Remover
- One litre Pack
£27.00 Sale:
£24.00
Description
No More Metal is a superior metal sequestriant designed to remove dissolved metals from pools, spas and hot tubs. This product is a must for all stain treatments, can be used to prevent calcium scale build up and is ideal for the initial filling of new pools.
- Very easy and economical to use.
- Can be used in all types of pool finishes.
- Sequesters (isolates and holds in solution) metals in the water and then remove them from the pool by filtration.
- Ideal for the start-up of new and re-surfaced pools.
Please note: Pools should not be shock treated within 48 hours of the addition of No More Metal. This product must be used alongside Multi Stain Remover in all stain treatments to ensure released metal ions are sequestered, otherwise repeated staining may occur.
Dosing
Pool Volume Calculator
Use this to calculate the volume of your pool. Enter measurements as required. For depth enter average depth of your pool. For shaped pools use average length and width.
DOSE RATE:
Dose rate (for stain treatments and scale removal and prevention only):
Volume Glns | Volume Litres | DOSE |
5,500 | 25000 | 250 gms |
11,000 | 50000 | 500 gms |
16,500 | 75000 | 750 gms |
For the filling of new pools and/or the refilling of pools that have been emptied for resurfacing then please follow the dose rate of 50mls for every 1,100 gallons / 5,000 litres during filling.
APPLICATION:
1. Water must be correctly balanced. Unbalance water is the cause of most stain and scale problems.
2. Add 500ml per 50,000 litres of pool water. Allow pool water to filter for a minimum of 12 hours after treatment.
3. Use a double dose for severe stain and scale problems.
4. INITIAL FILL OF NEW POOLS: Mix 50ml in a clean plastic bucket of water and add to the pool for every 5,000 litres of pool water. Repeat this procedure as the pool is filling.
5. Continued use of this product helps prevent staining from returning.
Stain Removal Guide
Click here to Download the Stain Removal Guide
Safety Data Sheet
Related products
-
Sale!
No More Scale
0 out of 5£30.00Sale:
£24.00Reduces scale - phosphate freeQuick ViewAdd to basket -
Sale!
Starver® X
0 out of 5£38.00Sale:
£29.00Removes phosphate-stops algaeQuick ViewAdd to basket -
Sale!
Multi Stain Remover
0 out of 5£28.00Sale:
£25.00Removes metal stainingQuick ViewAdd to basket -
Sale!
Miraclear Cube 35gm
0 out of 5£10.75Sale:
£8.00For pools less than 15,000 gallonsQuick ViewAdd to basket
Reviews
There are no reviews yet.